welding transformer
英 [ˈweldɪŋ trænsˈfɔːmə(r)]
美 [ˈweldɪŋ trænsˈfɔːrmər]
网络 电焊变压器; 焊接变压器
双语例句
- The electromagnetism parts which bearing the high current in the welding machine, such as the transformer and the filter reactor are the core part of the welding machine.
焊机中承载大电流的电磁件如变压器和滤波电抗器是整机的核心部件，电磁件的质量直接关系到电焊机的整体性能。 - Two-in-one uncoiling and leveling machine processes the silicon-steel sheet and iron slug used in welding machine and potential transformer.
二合一卷料校平装置主要用于电焊机变压器及电抗器硅钢片、铁芯片的加工。 - The control circuit of CO2 shielded gas welding of taped transformer in many factories is complex and has much more failure, is difficult to maintain.
多数厂家的抽头式CO2气体焊机控制电路复杂，故障率较高，维修较为繁琐。 - Study on harmonic current of arc welding transformer
弧焊变压器谐波研究 - The Reliability Analysis of Arc Welding Transformer
弧焊变压器的可靠性分析 - An Approach to the Control Characteristics of Inverting TIG Welding Electrical Source and Its New Transformer
逆变TIG焊电源控制特性及其新型变压器的研究 - Optimum Design of Welding Transformer
弧焊变压器的优化设计 - Study on Energy Saving Strategy of Arc Welding Transformer and Its Control System
弧焊变压器节能策略及其控制系统研究 - Optimum design of welding transformer by use of MDV method
弧焊变压器的混合离散变量法优化设计 - Welding in Oil Leak Spots of Transformer
变压器渗漏油的补焊 - Research on Improvement of Welding Technique of Upper Oil Tank in Transformer
变压器上节油箱焊装工艺改进的研究 - Analysis the three dimensional magnetic fields of welding transformer by using of the finite element method
用有限元法分析焊接变压器的三维磁场 - Design and Calculation for BX 6-1 60 Arc. Welding Transformer
BX6-160型弧焊变压器的设计与计算 - It is because of the existence of the nonlinear inductor that the instantaneous working state of the welding transformer is hardly to be analyzed with classical electrotechnical theory.
正是由于非线性电感的存在，造成难以用经典的电工学公式适时分析焊接变压器的工作状况。 - On the basis of modeling and analysis of the voltage and current signal in resistance welding transformer circuit, a current zero-crossing derivative ratio method was proposed to calculate the dynamic power factor online.
基于对交流电阻焊焊接变压器初级回路电压、电流信号的建模分析，提出电流过零导数比法测量电阻焊动态功率因数。 - Rigid synchronous control circuit of SCR control welding source without synchronous transformer
无同步变压器晶闸管弧焊电源精密同步控制电路 - Optimum design of movable core shunting arc welding transformer is carried out in the present paper.
对动铁分磁式弧焊变压器进行了优化设计。 - Optimum Design of Trapezoid Movable-core-shunting Welding Transformer Using MDV
梯形动铁分磁式弧焊变压器的混合离散变量法优化设计 - This paper introduces the short circuit breakdown of a movable winding arc welding transformer's input wire fixed electric plank, and breakdown of a welding machine's switch, and offers the concrete solutions.
介绍了动圈式弧焊变压器一侧输入线接线固定电木板短路故障和焊机转换开关故障，并给出了具体的解决方案。 - The characteristics, materials, structures and methods of welding in the manufacture of transformer windings are introduced. They are compared.
介绍了变压器绕组制造过程中导线焊接常用的方法、焊接结构形式、焊接材料、特点，并对其进行了比较。 - The X-modle welding gun with transformer for robot, the control system and the trouble diagnosing for welding system are analyzed completely.
对其中的点焊机器人一体式X型焊钳、焊接系统控制箱和点焊系统故障诊断通信接口盒作了比较全面的分析研究。 - An Optimum Program Design of Movable Core Arc Welding Transformer
梯形动铁式弧焊变压器优化程序设计 - In the article are analyzed the operating principle and the features for the welding transformer with the semi-opened winding and the ladder-shaped moving shunt.
本文对梯形动铁分磁半开式弧焊变压器的工作原理及特点进行了分析。 - By ameliorating secondary rectified circuit, a spot welding integrated transformer with 20 kHz switch frequency, 20% duty cycle and 6 kilogram weight has been designed.
通过改进二次整流电路，研制出开关频率20kHz，容量40kVA，暂载率20%，质量6kg的的点焊一体式变压器。 - New High Frequency Welding Technique of Transformer Lead
变压器引线高频焊接新工艺 - The core part of the inverter spot welding machine is the integrated transformer, which is consisted of transformer and rectifier.
变压器加整流器习惯被称为一体式变压器，是逆变点焊机的核心部件。 - Effect of power supply frequency to the welding transformer in the main circuit has been analyzed, and, through lab testing, appropriate series capacitance has been selected, which effectively reduce power voltage and no-load current of the transformer.
并针对斩波电路中工频分量对焊接变压器正常工作的影响进行了分析，通过试验选取合适的串联电容，有效的降低了变压器两端的工频电压及空载电流。 - This article puts forward a new main circuit, twelve-phase welding power source with phase-altemate transformer.
提出一种新型的焊接电源主电路形式&带相间变压器的十二相整流电源。 - Microcomputer ─ Controled Arc Welding Machine with Taped Transformer
微机控制的抽头式变压器弧焊机